Flexographic Printing Plate 6.35mm
Flexographic Printing Plate 6.35mm
Features :
- 1) Green Product, suitable for water base ink
- 2) Optimal hardness and flexibility
- 3) Excellent dot and isolated line reproduction
- 4) Solid printing performance
- 5) High latitude of exposure and processing
- 6) Good ink transfer
- 7) High impression
Product Specification
| Type | R635 | |
| Plate Thickness (mm) | 6.35 | |
| Rigidity (Shore A) | 33-35 | |
| Recommended Relief Depth(mm) | 2.2-3.0 | |
| Image Reproduction | 3%~95% | |
| Maximum Line, Line/Inch | 85 | |
| Minimum isolated line | 0.3mm (0.0118inch) | |
| Minimum Isolated Dot | 0.50mm (0.0197inch) | |
| Suitable Ink | Suitable for water and alcohol-based ink, incompatible with oil-based ink, hydrocarbon solvent or the ink containing ethyl acetate of more than 25% | |
| Main Application | Corrugated board, thick board etc. | |
| Dimension | 762x1016 (30x40) | √ |
| 1067x1524 (42x60) | √ | |
| 1067x2032 (42x80) | √ | |
| 1200x2032 (47.2x80) | √ | |
| 1270x2032 (50x80) | √ | |
| Storage | Raw Material | Unexposed plates should be stored in cool areas (4-32°C) away from heat. The plates must be placed flatly, and protected from contacting UV light. It is recommended to unpacked and handled in yellow light. |
| Finished Plates | Printing plate should be avoided excessive white light, irradiating from sunlight and exposing in high concentrated ozone environments for a long time either. After being unloaded, the plates should be cleaned thoroughly. | |
| Packing | 4 pcs per carton, 9 cartons per wooden case | |
| Guarantee Period | Under the recommended storage condition, guarantee period of Flexographic Printing Plate is 18 months. |
Process parameters:
| Type | R635 |
| Thickness (mm) | 6.35 |
| Back Exposure (seconds) | 120-240 |
| Main Exposure (mins) | 12-20 |
| Rinsing (mins) | 9-12 |
| Drying(hours) | 3-4 |
| Detackfying (minutes) | 5-8 |
| Post Exposure (mins) | 5 |
Note :
All the above data is depended on our plate-making device. Due to the different requirements of plate-making device, UV lamp power, relief depth and print image, the above recommended time can be changed appropriately. Customers should test on their own device for optimum plate quality.
Service
- 1. Samples available, we often send 2 pcs A3 or A4 size of flexo plates to customer for test.
- 2. Sizes of flexo plates can be produced according to customers’ demand.
- 3. We supply online technical support. If there is any problem, we will coordinate our engineers to help you solve the problem via e-mail/Tel/Video.
- 4. We have a tracking service every month to care about our products, if any problem, we will help you and learn from you together to solve the problem.
